Hardware

Using a highly controlled process, Du-Bro has devised a way to stabilize the Push Rod material so that neither heat nor cold has much effect on tri...

Specially formulated replacement stopper to convert any 2 oz to 50 oz Du-Bro fuel tank to Gasoline or Glo-Fuel. The Gasoline stopper is brown and t...

Standard Hinge measurements: 5/8" (16 mm) Wide X 1 1/8" (28 mm) Long. Weight: 0.5 grams / hinge.Mini Hinge measurements: 7/16" (11 mm) wide X 1 1/8...

Our Electric Flyer Hinge Tape has great adhesion characteristics and is easy to remove. In addition, our hinge tape will not leave residue. 15' Rol...

Comes with washer permanently attached to screw so you can't lose it. Screw size: #2 X 7/16". (24/pkg)Weight: 0.46 grams/each

These T-Pins are a must for all model building. Holds parts in place while gluing, sheeting, laminating, assembly, etc. An all around building aid....

#216 - Centers & guides for perfectly aligned slots for any hinge. (3) blades fit #2 X-Acto handle. (3) snap-on jig guides and (1) balsa picker...

Built to take heavy loads, 3/4" (19 mm) Wide X 1-3/8" (35 mm) Long X .040" (1 mm) thick. Removable 3/64" (1.2 mm) diameter cotter pin for maximum c...

Standard Hinge measurements: 5/8" (16 mm) Wide X 1 1/8" (28 mm) Long. Weight: 0.5 grams / hinge.Mini Hinge measurements: 7/16" (11 mm) wide X 1 1/8...

Exhaust Deflectors help to keep models clean and free of exhaust oils. 1/pkg

For Gasoline or Diesel Fuel ONLY. This tubing won't harden or crack and remains flexible.This tubing is also a great replacement for fuel line on s...

350T takes a 5/32 Axle (4mm). Du-Bro's low bounce captive air wheels have flown on more airplanes over the years than any other wheels on the marke...

Smooth inflatable tires with positive seal air valves. Features two piece bolt together hubs and hub caps. Wheels can be inflated (or deflated) thr...

For Gasoline or Diesel Fuel ONLY. This tubing won't harden or crack and remains flexible.This tubing is also a great replacement for fuel line on s...

Can be used in conjunction with our nylon or steel Kwik-Links or with ball links where extra long pushrods are needed. Bendable and strong. Rods ar...

RBS3096  Lead Balance Weights. Three strips of 5 gram and 10 gram adhesive backed weights. Total of 12 pcs of each size.

Nitro Line comes in 6 hot colors to add a great look to your vehicle. Our tubing is made from high quality 3/32" (2.38 mm) ID silicone that is dura...

These T-Pins are a must for all model building. Holds parts in place while gluing, sheeting, laminating, assembly, etc. An all around building aid....

Using a highly controlled process, Du-Bro has devised a way to stabilize the Push Rod material so that neither heat nor cold has much effect on tri...

1 3/8" Long with 5 adjustment positions. Each set includes 2 control horns that are centered on base, (2) self threading nut plates and (4) 2-56 x ...

Two essential tools for the shop are the Body Reamer & Scissors. Whether you are reaming holes for your body posts, antenna, or cutting a custo...

Fill your tank with ease directly from your 1 gallon fuel container. Just drill or cut a 1/2" (12.7 mm) diameter hole in the cap and install the fi...

5 piece ball link set, excellent for off-set steering, throttle and servo hook-ups. Ball is threaded for 2-56 nut. Threaded coupler 3/4" with 3/8" ...

Includes 1.5' (457.2 mm) blue (medium 3/32" / 2.38 mm) and 1.5' (457.2 mm) red(medium 3/32" / 2.38 mm) silicone tubing to distinguish your carb lin...

Using a highly controlled process, Du-Bro has devised a way to stabilize the Push Rod material so that neither heat nor cold has much effect on tri...

Can be used in conjunction with our nylon or steel Kwik-Links or with ball links where extra long pushrods are needed. Bendable and strong. Rods ar...

Designed for use with 1/8" or 5/32" brass annealed fuel tubing or aluminum tubing. These tools are perfect for most configurations and they do not ...

Standard and Metric taps and drills sold in matched pairs or in complete sets to eliminate the confusion of which drill and tap to use together. T...

High quality machined brass shaft collars that are great for wire landing gear and axle shafts. Enough stock so that threads will not strip and can...

The outside hex head will fit your glo-plug / prop nut wrench, inside socket is made to fit standard allen wrenches. Both methods insure a safe, no...

For .35-.60 size airplanes. Our super quality landing gear will absorb landings without bending out of shape. Featuring a one piece design, this Hi...

Snap fit on to wire, simply bend 90 degree angle on pushrod and install the E/Z Link on to pushrod (no Z Bend required). Super lightweight design. ...

300T takes a 5/32 Axle (4mm). Du-Bro's low bounce captive air wheels have flown on more airplanes over the years than any other wheels on the marke...

RBS1161 Irvine Hand Fuel Pump is usable with Gasoline or Methanol based fuels. The pump has a provision for mounting screws to enable fixing to a s...

Du-Bro's permanent mount blind nuts are available in 6 sizes. Used for mounting engines, landing gear, cowls, hatches, etc. The perfect mounting nu...

Smooth inflatable tires with positive seal air valves. Features two piece bolt together hubs and hub caps. Wheels can be inflated (or deflated) thr...

Du-Bro's Tru-Spin Prop Balancer is the most precise balancer on the market. Our specially designed locking cone securely centers and locks props on...

E/Z Connectors (#121 & 605) come complete with 2 or 12 each Connector, 4-40 x 1/8 Slotted Screw, black snap washer, and push on steel washer. W...

Du-Bro Fuel Tanks are designed to be tough! Our fuel tanks will not split or crack from vibration or pressure. In fact, our fuel tanks can be used ...

Du-Bro Fuel Tanks are designed to be tough! Our fuel tanks will not split or crack from vibration or pressure. In fact, our fuel tanks can be used ...

Nitro Line comes in 6 hot colors to add a great look to your vehicle. Our tubing is made from high quality 3/32" (2.38 mm) ID silicone that is dura...

Nitro Line comes in 6 hot colors to add a great look to your vehicle. Our tubing is made from high quality 3/32" (2.38 mm) ID silicone that is dura...

Du-Bro Fuel Tanks are designed to be tough! Our fuel tanks will not split or crack from vibration or pressure. In fact, our fuel tanks can be used ...

These are 1/2A T-Style Control Horns.FEATURES: Nylon constructionINCLUDES: Two control horns w/4 adjusting holes and 2 mounting holes (3/4" long {t...

Standard Hinge measurements: 5/8" (16 mm) Wide X 1 1/8" (28 mm) Long. Weight: 0.5 grams / hinge.Mini Hinge measurements: 7/16" (11 mm) wide X 1 1/8...

The outside hex head will fit your glo-plug / prop nut wrench, inside socket is made to fit standard allen wrenches. Both methods insure a safe, no...

For Glo-Fuel ONLY. Won't crack or harden and fits securely on fuel fitting.Made in USATUBING SIZESmall ID:1/16" (1.5 mm) OD: 9/64" (3.57 mm)Medium ...

#216 - Centers & guides for perfectly aligned slots for any hinge. (3) blades fit #2 X-Acto handle. (3) snap-on jig guides and (1) balsa picker...