Skip to content

Model Master Brown Detail Stain(Sg) En 14.7Ml *D

$2.99
SKU TTMM2179
Add to Wishlist

Notify me when back in stock

NEW ITEM

Stir well before applying as stains settle. Apply stain with a fine brush around detail, seems, recessed and standing detail or apply evenly over entire surface. Stain will naturally concentrate in corners and pull up flat surfaces. To blend, thin or remove use 8824 or 1148TT Enamel Thinner. Let dry for 15 minutes, remove excess with thinner using either a moistened cloth or fine brush. Leave 24 hours for full cure. Re-coating before then may result in blending of colors. Seal with clear coat. Always test surface compatibility with paint on hidden area or on same type of surface that is not your finished project.

Thin paint 3 parts paint to 2 parts thinner
Adjust compressor to 20-25 PSI
For Aztek Airbrushes use high flow nozzles, Red #9342C, Orange #9343C, or Yellow #9344C
Other brand airbrushes use a #3 needle
  • Our shipping times are typically 24-48hrs from ordering during normal business hours.
  • We use a Courier and Australia post as our agents.  Please allow typical delivery times for your area.
  • International shipping is priced per country, please check your cart before ordering.
  • We are unable to ship Dangerous goods overseas. 
  • We are also limited by length of some parcels. Anything over 1.05m will need a specialist courier quote which we can provide.
  • When adding items to your cart you can get a quote for shipping first before commiting to the order.